50X12X8 SHARPENING STONE FOR KOLOSSAL AND BERKEL FUTURA SLICERS AND COMPATIBLE MODELS, COARSE GRIT, FOR SHARPENING

Fine-grit emery wheel (blade-sharpening stone) for slicer sharpener assemblies, for finishing/polishing the blade edge. Ø 50 mm × thickness 9 mm × hole 12 mm Compatible with Marwel and OCM slicers and models compatible with these dimensions

Coarse-grain emery stone for Marwel, OCM and compatible slicers: 50 mm diameter, 13 mm thickness, 12 mm center hole. Stone for the first, rough-grinding pass on the blade.

Replacement 50x12x12 medium-grain emery stone for the sharpening unit of Marwel, OCM and compatible slicers (ref. 190MLMT20). Diameter 50 mm, thickness 12 mm, 12 mm centre hole. Restores the blade edge; replace when the stone is worn, glazed or chipped. Check your original stone's dimensions before ordering.

Coarse-grain emery stone for Oberwerk and compatible slicers: 50 mm diameter, 10 mm thickness, 12 mm center hole. Stone for the first, rough-grinding pass on the blade.

50x8x6 sharpening stone for OMAS slicers and compatible models, fine/medium grit

51x15x14.3 mm fine-grit sharpening stone for OMAS and compatible meat slicers

Fine-grit grinding wheel 51x7x14.3 mm for the sharpener of Omega-CEG slicers and compatible models . Knife-type finishing wheel that polishes and restores the blade edge. Dimensions: outer Ø 51 mm, thickness 7 mm, hole 14.3 mm. Compatible with ABO sharpeners with cover, CE/CEG, BF 300/350 and Omega VS 350/V33. Code 240OAFC20.

Grinding wheel 58x7x14.3 mm , fine grit , for slicer sharpeners: replacement stone for dressing and maintaining the blade edge. Diameter 58 mm, thickness 7 mm, center bore 14.3 mm.

Medium-grit emery wheel for the sharpener assembly of Rheninghaus slicers and compatible models. Dimensions: Ø50 x thickness 9 x hole 6 mm. Revives the edge of the circular blade; replace when the stone is worn or glazed. Check dimensions and grit against the original part.

Coarse grain sharpening stone, Ø 50 x 9 x bore 6 mm, for Rheninghaus and compatible slicer sharpeners. Wheel for the first sharpening stage of the blade edge.

60x8x6 mm fine-medium grain emery wheel for the sharpener of Filat slicers and compatible models. 60 mm diameter, 8 mm thickness, 6 mm center hole; for finishing the blade edge.